Residential carpets as well as those in businesses tend to take up daily beating. Ground dirt plus food particles and maybe some sticky spilled beverages can allow for major mess in your carpet. Not to mention the mold, mites, bacteria and dust that could be lurking along the surface. When it comes to carpet cleaning, you may have wondered which strategies work well and why. There are several ways for you to clean your home carpets. There are two basic kinds of methods used in cleaning carpets namely water extraction and dry carpet cleaning.

Using a long haired brush or a firm sponge is advisable in maintaining the rugs. The long haired brush should not be too hard or firm, while sponge should not easily come apart when brushed on the surface. A linear motion is also advisable when trying to clean the entire piece, or even just a small area of it. Circular motions might be too rough. The project should be done in a big space with water on hand. When removing the shampoo or soap, it should be rinsed thoroughly in clean, clear water. A squeegee is also handy in draining or squeezing the excess water out. Lay it out on a relatively flat surface and run the squeegee in the direction of the nap in order to keep the natural lay of the pile. Do not apply too much pressure when using the squeegee because it might pull out some of the pile.

Absorbent compound is another type of method where agent is sprinkled on the carpet and made into a pile with the help of machine. The agent is vacuumed clean after half an hour and the soil that is deposited are removed. Foam is done with the help of detergent. Foam is generated using a machine and using extraction vacuum method the foam is collected along with the soil that breaks up. The right type of services has to be used depending on where the carpet is laid. types also may vary depending on the climate conditions.

While you can get cheap carpet cleaning prices at many domestic cleaning companies if you are savvy enough, it will still cost more than renting a machine. However, if you hire a professional carpet barn utah company they will get your carpet looking model perfect in a snap. Professionally cleaned carpets generally dry within a few hours. Some even have a dry cleaning option that uses no water at all, which means virtually no time spent waiting for water to evaporate. On the other hand, if you’re unfortunate to hire an unprofessional cleaning company, your carpets could end up looking worse than ever before.

Steam cleaning and water extraction. Steam cleaning typically uses hot water extraction techniques and not necessarily steam. Hot water and shampoo solution is usually sprayed into the carpet, allowing it to penetrate deep and then extracted out using a wet vacuum cleaner. This method is a popular choice these days and is believed to be highly efficient. Deep hot water cleansing offered by this method kills around 99% of bacteria and dust mite matter in your carpet. It can also be a DIY project as renting this kind of cleaner is not that costly. This strategy may take up to eight hours for the carpet cleaning services to dry and it also may leave moisture deep down allowing for mold and bacterial growth.

Mix 3 or 4 drops of dish soap in a spray bottle and fill with hot water. Mix the solution so it sprays evenly by shaking the bottle and mixing the soap into the water. Next, either spray the affected area or pour some of the mixed solution directly on to the carpet where the spill occurred. Use a household spoon to agitate the mixture into the carpet where the spill happened. Do not scrub so much that the carpet fibers are damaged, do so just enough to make sure the soap is treating the liquid.

Now that you have a better understanding of how to hire a carpet cleaning service, you can make an informed decision. Keep these tips in mind so as to hire a reliable and trustworthy carpet cleaning company. You will not be disappointed; instead, you and your family will be happy.